{"product_id":"jotacryl-white-18-l","title":"Jotacryl White - 18 L","description":"\u003ch2 class=\"ifont-title font-weight-normal\"\u003eJotacryl White - 18 L\u003c\/h2\u003e\n\u003cdiv class=\"ifont-description\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eType :\u003c\/strong\u003e This product is a glossy solvent based acrylic topcoat.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eFeatures and benefits :\u003c\/strong\u003e Provides washable, high gloss finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eRecommended use :\u003c\/strong\u003e Ideal as a topcoat in Texotile system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eSubstrate :\u003c\/strong\u003e Cement plaster, concrete, block work, rendered surfaces, gypsum board etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eProduct data\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePackaging size : 18 L\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eColours : White\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSolids by volume : 34 ± 2 volume% Theoretical\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecific gravity : 1.15 Only for white colour.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFlash point : Closed cup: 25°C (77°F)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVOC : 577 g\/l ISO 11890 EU\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVOC 577 g\/l US EPA method 24.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVOC comments : This is the theoretical value. Tested value will vary depending on test methodology, accuracy of equipment used for testing and test conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication data\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe product can be applied by\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRoller : Recommended.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpray : Use airless spray or conventional spray.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBrush : Recommended to paint corners and edges.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eGuiding data for airless spray\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eNozzle tip 0.018–0.021\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpray angle degrees 65–80°\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePressure at nozzle 15 MPa (150 kp\/cm², 2100 psi)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eCleaning of painting tools : Water\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFilm thickness per coat\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTypical recommended range\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDry film thickness 30 - 40 μm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWet film thickness 90 - 120 μm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFilm thickness will vary and is calculated as average.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTheoretical spreading rate 11.5 - 8.5 m²\/l\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature, wastage during painting etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMaximum spread rate per coat is obtained at minimum dry film thickness and vice versa.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThinner : Jotun Thinner No. 7\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDilution : Maximum 10 %\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eConditions during application\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying. The moisture content in the substrate should not exceed 4 % (by weight). The coating should not be exposed to oil, chemicals or mechanical stress until fully cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDrying times\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDrying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1. Recommended data given is, for recoating with the same generic type of paint.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2. In case of multi-coat application, drying times will be influenced by the number and sequence and by the total thickness of previous coats applied.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3. The surface should be dry and free from any contamination prior to application of the subsequent coat.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe drying time is measured by stated values:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRelative Humidity (RH) 50 % Substrate temperature 10 °C 23 °C 40 °C\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eSurface (touch) dry              6 h 3 h 1 h\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eHard dry                             10 h 5 h 3 h\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDry to over coat, minimum   6 h 3 h 1 h\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDirections for use\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eSurface preparation\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc. All traces of form release agents\/curing agents must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust\/loose particles must be removed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRemarks :\u003c\/strong\u003e Other systems may be specified, depending on area of use. Contents of packaging with different batch numbers must be mixed together before use. Please refer to the Decorative Sales Department for technical advice.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDisclaimer\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe information in this document is given to the best of Jotun's knowledge, based on laboratory testing and practical experience. Jotun's products are considered as semi-finished goods and as such, products are often used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product itself. Minor product variations may be implemented in order to comply with local requirements. Jotun reserves the right to change the given data without further notice.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eUsers should always consult Jotun for specific guidance on the general suitability of this product for their needs and specific application practices.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Jotun Paints","offers":[{"title":"Default Title","offer_id":52452628136120,"sku":null,"price":455.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/8595\/8328\/files\/jotacryl-white-18-l.png?v=1767880597","url":"https:\/\/signaturebldg.com\/products\/jotacryl-white-18-l","provider":"Signature Building Material LLC","version":"1.0","type":"link"}