{"product_id":"jotun-stucco-4-l","title":"Jotun Stucco - 4 L","description":"\u003ch2 class=\"ifont-title font-weight-normal\"\u003eJotun Stucco - 4 L\u003c\/h2\u003e\n\u003cdiv class=\"ifont-description\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eType :\u003c\/strong\u003e This product is an acrylic copolymer based putty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eFeatures and benefits :\u003c\/strong\u003e Easy application. Provides an excellent base for subsequent coats. Free from harmful chemicals like APEO, formaldehyde, heavy metals etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eRecommended use :\u003c\/strong\u003e Ideal for interior surfaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eCement plaster, concrete, block work, rendered surfaces, gypsum board etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eSubstrate should have sufficient strength to receive the paint. Any defects in the substrate like surface undulations, cracks, pin holes etc., should be rectified\/filled before starting painting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eProduct data\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePackaging size : 4 L\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eColours : White\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSolids by volume 50 ± 2 volume%\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecific gravity : 1.83 Theoretical\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVOC : 0 g\/l ISO 11890 EU\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVOC comments : This is the theoretical value. Tested value will vary depending on test methodology, accuracy of equipment used for testing and test conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe product can be applied by Putty knife.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFilm thickness per coat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTypical recommended range\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDry film thickness 85 - 130 μm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWet film thickness 165 - 250 μm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFilm thickness will vary and is calculated as average.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTheoretical spreading rate 6 - 4 m²\/l\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpreading rate per coat : 2.8 m²\/kg (Theoretical)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature,\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ewastage during painting etc.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe average spreading rate per coat can be confirmed at site by a trial application.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMaximum spread rate per coat is obtained at minimum dry film thickness and vice versa.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThinner\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWater\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDilution\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMaximum 5 %\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eConditions during application\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eDrying times\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDrying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e1. Recommended data given is, for recoating with the same generic type of paint.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e2. In case of multi-coat application, drying times will be influenced by the number and sequence and by the total thickness of previous coats applied.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e3. The surface should be dry and free from any contamination prior to application of the subsequent coat.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe drying time is measured by stated values:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRelative Humidity (RH) 50 % Substrate temperature 10 °C 23 °C 40 °C.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eSurface (touch) dry            6 h 3 h 1 h\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eHard dry                           16 h 8 h 6 h\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDry to over coat, minimum 16 h 8 h 6 h\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSurface preparation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc. All traces of form release agents\/curing agents must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust\/loose particles must be removed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRecommended paint system\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003ePrimer\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePVA Primer or Fenomastic Emulsion Primer : 1 Coat\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eFiller\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eStucco : 2 Coats\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRemarks\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOther systems may be specified, depending on area of use. Contents of packaging with different batch numbers must be mixed together before use. Please refer to the Decorative Sales Department for technical advice.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnvironmental labelling\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGreen Building Standards\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe product contains effective film conserving agents that contributes to reducing mould growth on the wooden surface.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLEED®v4 (2013) \/ LEED®v4 .1 (2019):\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eEQ credit: Low emitting materials\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- VOC content for Primers, Sealers and Undercoaters (100 g\/l) (CARB (SCM)2007) and emission lower than or\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eequal to 0,5 mg\/m3 (CDPH method 1.2)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMR credit: Building product disclosure and optimization\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Material Ingredients, Option 2: Material Ingredient Optimization, International Alternative Compliance Path -\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eREACH optimization: Fully inventoried chemical ingredients to 100 ppm and not containing substances on the\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eREACH Authorization list – Annex XIV, the Restriction list – Annex XVII and the SVHC candidate list.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Environmental Product Declarations. Product-specific Type III EPD (ISO 14025;21930, EN 15804).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBREEAM® International (2016)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Hea 02: VOC emission ((ISO 16000 - series (2006) or CDPH method 1.2 (2017)) and the VOC content for\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eInterior matt walls and ceilings (10 g\/l)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Mat 01: Product-specific Type III EPD (ISO 14025;21930, EN 15804).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eHealth and safety\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease observe the environmental and precautionary notices displayed on the container.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eA Material Safety Data Sheet for the product has been issued.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDetailed information regarding health and safety risks and precautions for the use of this product is specified in\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ethe product's Safety Data Sheet.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFirst-aid measures, refer to section 4.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eHandling and storage, refer to section 7.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTransport information, refer to section 14.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRegulatory information, refer to section 15.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDisclaimer\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe information in this document is given to the best of Jotun's knowledge, based on laboratory testing and practical experience. Jotun's products are considered as semi-finished goods and as such, products are often used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product itself. Minor product variations may be implemented in order to comply with local requirements. Jotun reserves the right to change the given data without further notice.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eUsers should always consult Jotun for specific guidance on the general suitability of this product for their needs\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eand specific application practices.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Jotun Paints","offers":[{"title":"Default Title","offer_id":52452623089848,"sku":null,"price":25.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/8595\/8328\/files\/jotun-stucco-4-l.png?v=1767880393","url":"https:\/\/signaturebldg.com\/products\/jotun-stucco-4-l","provider":"Signature Building Material LLC","version":"1.0","type":"link"}